top of page

Divine Headboards

Public·95 members

How to Use MProg Multi Device EEPROM Programmer 3.0 for Free

How to Use MProg Multi Device EEPROM Programmer 3.0 for Free

MProg is a software tool that allows you to program multiple EEPROM devices simultaneously using a USB interface. It supports a wide range of devices from various manufacturers, such as Atmel, Microchip, STMicroelectronics, and more. MProg can also read and write data to the EEPROM devices, as well as erase and verify them.

mprog multi device eeprom programmer 3.0 free.rar

In this article, we will show you how to download and install MProg Multi Device EEPROM Programmer 3.0 for free, and how to use it to program your EEPROM devices. You will need a Windows PC, a USB cable, and some EEPROM devices to follow this tutorial.

Step 1: Download MProg Multi Device EEPROM Programmer 3.0 for Free

The first step is to download the MProg Multi Device EEPROM Programmer 3.0 software from the link below. This is a compressed file with the extension .rar, which means you will need a software like WinRAR or 7-Zip to extract it.

Download MProg Multi Device EEPROM Programmer 3.0 for Free.rar

Once you have downloaded the file, right-click on it and select "Extract Here" or "Extract to MProg Multi Device EEPROM Programmer 3.0 for Free". You will see a folder with the same name as the file, containing the MProg software and some other files.

Step 2: Install MProg Multi Device EEPROM Programmer 3.0

The next step is to install the MProg software on your PC. To do this, open the folder you extracted in the previous step and double-click on the file named "setup.exe". This will launch the installation wizard, which will guide you through the process.

Follow the instructions on the screen and accept the license agreement. You can choose the default settings or customize them according to your preferences. When the installation is complete, click on "Finish" to exit the wizard.

Step 3: Connect Your EEPROM Devices to Your PC

Now that you have installed the MProg software, you can connect your EEPROM devices to your PC using a USB cable. Make sure that your PC recognizes the devices and installs the necessary drivers. You can check this by going to "Device Manager" and looking for "USB Serial Port" or "FTDI USB Devices" under "Ports (COM & LPT)".

If you have more than one EEPROM device connected, you will see multiple entries with different COM numbers. Note down these numbers, as you will need them later to select the devices in the MProg software.

Step 4: Launch MProg Multi Device EEPROM Programmer 3.0

The final step is to launch the MProg software and start programming your EEPROM devices. To do this, go to "Start" > "All Programs" > "MProg Multi Device EEPROM Programmer" > "MProg". You will see a window like this:

The first thing you need to do is select the devices you want to program from the drop-down menu at the top left corner of the window. You can select multiple devices by holding down the Ctrl key and clicking on them. The selected devices will be highlighted in blue.

Next, you need to configure the settings for each device according to its specifications and your requirements. You can do this by clicking on the "Edit" button next to each device and adjusting the parameters in the pop-up window that appears.

Some of the parameters you can configure are:

  • Device Type: The type of EEPROM device you are using, such as AT24C02, 93C46, etc.

  • Manufacturer ID: The ID of the manufacturer of the device, such as A1 for Atmel, BF for Microchip, etc.

  • Device ID: The ID of the device itself, such as C2 for AT24C02, C6 for 93C46, etc.

Serial Number e0e6b7cb5c


Welcome to the group! You can connect with other members, ge...

bottom of page